MINSPEC PF FEEDERS
Minspec has a range of vibratory pan feeders driven by out-of-balance motors suitable for most duties.
The feeders are fabricated from fully killed Grade 250 plate and are designed to withstand the effects of impact, vibrating and static loads.
After fabrication, the components are stress relieved, machined where applicable, then blasted and prime coated with inorganic zinc primer.
The feeders are of fully welded construction to provide a distortion- and twist-free structure.
DRIVE BEAM
The twin out-of-balance motors are mounted on a replaceable drive beam, complete with large end flanges for even dissipation of forces through the side plates. After fabrication and weld testing, the beams are stress relieved. End plates and exciter pads are machined and precision drilled to facilitate fitment between side plates and accommodate the exciters.
LINERS
The feeders are lined with bolt-in replaceable liners on the base and sides.
VIBRATORS
The PF feeders are excited by twin contra-rotating out-of-balance motors.
The use of integrally mounted motors dispenses with V-belt drives and makes installation easier. Anticipated noise levels from these motors are expected to be 80 dBA.
ISOLATION
Isolation is by either steel coil or rubber springs and will be designed to provide the desired isolation.
FEEDER ARRANGEMENT
The feeder body, drive arrangement and isolation system are configured to suit the required duty and installation conditions.
Contact Minspec to discuss feed rate, material characteristics, impact loading, installation and technical requirements.
